Duerkopp Adler 195 Installationshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Installationshandbuch für Nähmaschine Duerkopp Adler 195 herunter. Duerkopp Adler 195 14 Seiten.
Auch für Duerkopp Adler 195: Betriebsanleitung (18 seiten)
Seite drucken
5. Positioning the Machine Head, V-belt Placement,
Attaching the Belt Guard and Handwheel
1
10
2
–
Set the sewing head into the table top cutout.
–
Fold over the sewing head and remove the
safety bar 1.
–
Plug the arresting pin 2 into one of the notches
of the built-in adjustment disc.
–
Screw off the handwheel.
–
First place the V-belt over the machine belt
pulley.
–
Place the belt on the motor belt pulley.
By swinging the motor tension the V-belt so
that it can be pressed in at its center by about
10 mm without great effort.
–
Screw on the belt guard with 5 screws.
When folding over, the belt guard must go into
the table top cutout unimpaired.
–
Screw on the motor belt guard.
Set the securing cams so that the belt does
not slip out of the belt pulley when the sewing
head is folded over.
–
Screw on the handwheel.
The correct position of the handwheel is
derived from the additional holes in the hand
wheel and on the belt flange. They must lie
congruent.