Duerkopp Adler 195 Installation Manual - Page 10

Browse online or download pdf Installation Manual for Sewing Machine Duerkopp Adler 195. Duerkopp Adler 195 14 pages.
Also for Duerkopp Adler 195: Operating Instructions Manual (18 pages)

Print Page

5. Positioning the Machine Head, V-belt Placement,

Attaching the Belt Guard and Handwheel

–

Set the sewing head into the table top cutout.

–

Fold over the sewing head and remove the

safety bar 1.

–

Plug the arresting pin 2 into one of the notches

of the built-in adjustment disc.

–

Screw off the handwheel.

–

First place the V-belt over the machine belt

pulley.

–

Place the belt on the motor belt pulley.

By swinging the motor tension the V-belt so

that it can be pressed in at its center by about

10 mm without great effort.

–

Screw on the belt guard with 5 screws.

When folding over, the belt guard must go into

the table top cutout unimpaired.

–

Screw on the motor belt guard.

Set the securing cams so that the belt does

not slip out of the belt pulley when the sewing

head is folded over.

–

Screw on the handwheel.

The correct position of the handwheel is

derived from the additional holes in the hand

wheel and on the belt flange. They must lie

congruent.