Duerkopp Adler 195 Installation Manual - Page 11

Browse online or download pdf Installation Manual for Sewing Machine Duerkopp Adler 195. Duerkopp Adler 195 14 pages.
Also for Duerkopp Adler 195: Operating Instructions Manual (18 pages)

Print Page

6. Making the Plug Connections to the Motor Control,

Attaching the Synchronizer (Only Positioning Drive)

–

Fold over the machine

–

Connect the voltage compensation lead 1 to

the head.

–

If supplied, connect the external control panel.

–

Lay the wiring for buttons, control panel and, if

supplied, sewing light in the head cable duct.

Attention!

Before installing the synchronizer, switch off

the thread trimmer function on the control

panel.

–

With the machine switched off, push the

synchronizer onto the handwheel so that its

groove catches over the mounting pin on the

belt guard.

–

Arrest the handwheel in position A.

–

Screw on the synchronizer.

Position the marking 2 directly opposite the

notch 3.

This is position "0", the dependent initial

position for all machine position settings made

at the factory.

For setting the 1st and 2nd needle positions

see Section 9.