Duerkopp Adler 195 Kurulum Kılavuzu - Sayfa 11

Dikiş Makinesi Duerkopp Adler 195 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Duerkopp Adler 195 14 sayfaları.
Ayrıca Duerkopp Adler 195 için: Kullanım Talimatları Kılavuzu (18 sayfalar)

Sayfayı Yazdır

6. Making the Plug Connections to the Motor Control,

Attaching the Synchronizer (Only Positioning Drive)

–

Fold over the machine

–

Connect the voltage compensation lead 1 to

the head.

–

If supplied, connect the external control panel.

–

Lay the wiring for buttons, control panel and, if

supplied, sewing light in the head cable duct.

Attention!

Before installing the synchronizer, switch off

the thread trimmer function on the control

panel.

–

With the machine switched off, push the

synchronizer onto the handwheel so that its

groove catches over the mounting pin on the

belt guard.

–

Arrest the handwheel in position A.

–

Screw on the synchronizer.

Position the marking 2 directly opposite the

notch 3.

This is position "0", the dependent initial

position for all machine position settings made

at the factory.

For setting the 1st and 2nd needle positions

see Section 9.