Duerkopp Adler 195 Kurulum Kılavuzu - Sayfa 12

Dikiş Makinesi Duerkopp Adler 195 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Duerkopp Adler 195 14 sayfaları.
Ayrıca Duerkopp Adler 195 için: Kullanım Talimatları Kılavuzu (18 sayfalar)

Sayfayı Yazdır

7. Connecting the Compressed Air Maintenance Unit

8. Readying the Machine for Operation

For operation of the pressure foot stroke, stitch

condensation and thread trimming, a supply of

water-free, lightly oiled compressed air is required.

–

Screw the maintenance unit to the frame.

–

Establish the PU3-hose connection 1 between

the maintenance unit and the machine head.

–

With the compressed air disconnected or shut

off, fill lubricating oil ESSO SP-NK 10.

Open screw 2 and fill up to the grooved

marking.

–

Connect the maintenance unit connector hose

to the compressed air supply.

–

Pull up the handle 5 and set an operating

pressure of 6 bar by turning.

–

Mounting the Yarn Stand

–

Fill the oil tank for the central oil wick

lubrication up to the upper marking line (see

Operating Instructions Section 2.1)

–

Plug in the mains plug.

–

Briefly switch on the motor protection switch

for three phase motors.

Check the direction of rotation on the motor

ventilation wheel. See arrow on the belt guard.

If the direction of rotation is incorrect

interchange 2 phases in the mains plug.

–

Check the feed quantity of the oil mister

(approx. 1 drop every 10 work cycles). Correct

if necessary. See Section in the Operating

Instructions.