Danco GoBidet 2003 Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Werkzeuge Danco GoBidet 2003 herunter. Danco GoBidet 2003 6 Seiten.

Seite drucken
B. COMO INST
L
C. BRAIDED "T" HOSE INSTALLATION
GoBidet - Installation Instructions
Remember to use Teflon tape (provided) on all water line
1.
connections.
2.
In Step #B.2, you should have connected the braided "T" hose
(Part no. 2003.3W) to GoBidet™ unit.
3.
Connect plastic, female terminal of "T" hose to bottom of tank (onto
the fill valve).
4.
Connect metal, female fitting of "T" hose to water supply cut-off
valve/angle-stop.
5.
Dry your work area completely. Turn on water supply.
6.
Check for leaks by placing a newspaper underneath the work
area. No drips, no leaks.
7.
If joints are leaking, remove existing tape and retape them.
D. FINAL INSTALLATION INSTRUCTIONS
1.
If no leaks are found, it is time to re-install your toilet seat using
existing screws and nuts. If they are unusable, purchase new
ones at your local retailer.
2.
First, insert a screw through the seat and the threaded bushing.
Second, insert the remaining screw through the seat, the provided
plastic spacer (Part no. 2003.11), and the toilet. Tighten nuts onto
screws.
GoBidet INSTALLATION INSTRUCTIONS
B.
3.
Check to be sure that the seat does not rest heavily upon the
shower assembly (Part no 2003.01) of the GoBidet™ when in
the down position. If it does, see item #6 in "Troubleshooting."
E. OPERATING INSTRUCTIONS
1. While sitting on your toilet seat, use the horiziontal control handle
on your GoBidet™ to move the shower head assembly toward
the center of the toilet (underneath the desired area).
2. VERY GENTLY turn ON and adjust water flow by moving the
vertical water control stick (Part no. 2003.04) backward toward
toilet tank.
3. When finished cleansing, return water flow to OFF position by
moving water control stick forward. Move shower head to "rest"
position underneath the toilet's rim.
***USE OF GOBIDET™ WITH HOT WATER CONNECTED***
VERY GENTLY turn on and adjust water flow by moving the
vertical water control stick (Part no. 2003.04) backward toward
toilet tank. Adjust water control stick left-to-right to choose your
water temperature comfort zone.
VERY IMPORTANT - TO AVOID SCALDING: DO NOT USE HOT WATER ONLY!
3