3P Technik VF12 Betriebs- und Montageanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebs- und Montageanleitung für Water Filtration Systems 3P Technik VF12 herunter. 3P Technik VF12 8 Seiten. Volume filter

Seite drucken
Assembly instructions
3P Volume Filter VF12 - installation
Wastewater outlet:
12"
Outlet to the cistern:
10"
2 x rainwater inlet:
12"
It is advisable to remove the lamella unit before assembly.
To do this, undo the locking screws by 2 to 3 turns  do not unscrew completely!
Pull the lamella unit out upwards at an angle.
When installing the shaft in the earth, protect the filter with a foil in order to avoid
contamination of the filter with mortar when grouting the cone or the shaft rings.
6
Base of drain pipe = shaft bottom
Base of outlet pipe = 8.26"
from shaft bottom
Base of inlet = 31.89"
from shaft bottom