3P Technik TCA5000950 Betriebsanleitung - Seite 11

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Controller 3P Technik TCA5000950 herunter. 3P Technik TCA5000950 12 Seiten. 3p mains water top-up set compact

Seite drucken

Symptom

Possible Faults

Controller does

Internal fuse failure.

not function

(no lights).

Controller or associated

wiring has tripped the

mains circuit breaker or

RCD.

Pump does not

Pump failure.

run, top-up and

other functions

Controller Damaged.

seem ok.

For all other

Contact your system

faults.

supplier.

TCA5000950 v1.3

Solution

Have the controller's internal fuses checked by a

qualified electrician and replaced if necessary. If the

unit fails again, contact your supplier for replacement.

If in any doubt please consult a qualified electrician or

electronic technician.

Have the supply circuit checked by a qualified

electrician. Check circuit breaker is of a suitable rating

(10A Type B recommended), also test wiring

insulation and earth. If the supply circuit is proved to

have no fault, contact your supplier for replacement.

Unplug the pump and test separately.

The control unit can supply up to 10A at 240v to the

pump. It may be damaged if this specification is

exceeded.

If your system supplier is no longer trading, you may

consult 3P Technik UK.

www.3ptechnik.co.uk

28-Sept-2021

Page 11 of 12