Casella Apex2 PLUS Feldhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Feldhandbuch für Water Pump Casella Apex2 PLUS herunter. Casella Apex2 PLUS 10 Seiten. Personal sampling pump

Charging the Apex2™

Docking Stations are used to support both battery charging and USB data downloading (in

Plus and Pro Models). The single way docking station is powered from a PC18 12 volt mains

power adapter, the five way version uses a PC28 adapter.

Please note that in the five-way docking station only the first 'pocket' can be used for USB

download of run data and is indicated by the symbol

USB to P.C

To 12V Power

for Download

Adapter

Charging commences when an Apex2 is placed in the docking

station, the pumps display will show a battery charging icon plus the

batteries percentage state of charge. The display may blank after the

user selected display timeout period however the red LED will flash

continuously during the entire charging cycle. Pressing the power

button

will 'wake' the display such that the charging progress can

be checked. Once fully charged, a solid Blue LED will be shown.

Typical charge time from empty to full is approximately 6 hours. Shorter charge times will

result in a reduced pro-rata run time.