AOK TX2065A Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Wetterstation AOK TX2065A herunter. AOK TX2065A 15 Seiten.

When t he w eat her st at ion is connect ed t o t he bat t eries on t he first t ime, aft er det ect ing
t he t emperat ure/ humidit y, it w ill aut omat ically ent er the w eat her set t ing mode, press t he
Snooze but t on t o exit or aut omat ically exit aft er 20S, ent er t he RF receiving for 3 minut es,
and then enter t he receiving RCC for 7 minut es.
Generally, t he out door sensor w ill connect w it h t he base unit aut omat ically. If it doesn't
connect , please follow below st eps t o set :
• Ensure t hat t he w eat her st at ion is in t he same channels wit h t he out door sensor.
• Long press t he CH but t on on the base unit t o search signal from t he out door sensor.
• The sensor receiving icon w ill flash w hen searching for the signal.
• Aft er t he sensor is connect ed, t he icon w ill become st able.
Note: After replacing the sensor battery, you need to press and hold the CH button of the
station to receive again.
Reception RCC
Aft er successful recept ion of t he signal for t he out door sensor, t he recept ion of t he DCF77
t ime signal will begin and t he radio cont rol indicat or w ill blink on t he display next t o t he
t ime. This process can take from 7 minutes. All but t ons except t he SNOOZE/ LIGHT and
but t ons are disabled during t he recept ion process. When t he signal is received, t he RCC
t ow er part mark is st at ic, and t he arc ant enna flashes at a frequency of 1Hz; When t he signal
is w eak and t he correct signal cannot be dist inguished, t he t ower part flashes at 1Hz, and
t he arc ant enna part does not display.
1. When t he receiving signal is successful, t he RCC receiving sign w ill be fully displayed and
t he receiving st at e w ill be exit ed;
2. During the receiving process, single pressing the "
" butt on w ill exit the RCC receiving
st at e, except t hat single pressing t he " SNOOZE/ LIGHT " but t on can light up t he backlight
funct ion, ot her but t ons have no funct ion;
3. Aut omat ic recept ion: every morning (current t ime zone)01:00, 02:00, 03:00 t o force
recept ion t o 04:00, 05:00 to choose t o receive 05:00, regardless of w hether the reception is
successful or not , it w ill no longer be received on t hat day, and t he RCC recept ion t ime is 7
minut es;
4. If t he receiving signal fails on t he same day, t he next receiving t ime w ill be 01:00 t he next
day;
5. In t he process of receiving RCC, w hen encount ering t he ALARM alarm, it will exit t he RCC
reception and sw it ch to t he alarm
7