AOK TX2065A Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AOK TX2065A. AOK TX2065A 15 pages.

When t he w eat her st at ion is connect ed t o t he bat t eries on t he first t ime, aft er det ect ing

t he t emperat ure/ humidit y, it w ill aut omat ically ent er the w eat her set t ing mode, press t he

Snooze but t on t o exit or aut omat ically exit aft er 20S, ent er t he RF receiving for 3 minut es,

and then enter t he receiving RCC for 7 minut es.

Generally, t he out door sensor w ill connect w it h t he base unit aut omat ically. If it doesn't

connect , please follow below st eps t o set :

• Ensure t hat t he w eat her st at ion is in t he same channels wit h t he out door sensor.

• Long press t he CH but t on on the base unit t o search signal from t he out door sensor.

• The sensor receiving icon w ill flash w hen searching for the signal.

• Aft er t he sensor is connect ed, t he icon w ill become st able.

Note: After replacing the sensor battery, you need to press and hold the CH button of the

station to receive again.

Reception RCC

Aft er successful recept ion of t he signal for t he out door sensor, t he recept ion of t he DCF77

t ime signal will begin and t he radio cont rol indicat or w ill blink on t he display next t o t he

t ime. This process can take from 7 minutes. All but t ons except t he SNOOZE/ LIGHT and

but t ons are disabled during t he recept ion process. When t he signal is received, t he RCC

t ow er part mark is st at ic, and t he arc ant enna flashes at a frequency of 1Hz; When t he signal

is w eak and t he correct signal cannot be dist inguished, t he t ower part flashes at 1Hz, and

t he arc ant enna part does not display.

1. When t he receiving signal is successful, t he RCC receiving sign w ill be fully displayed and

t he receiving st at e w ill be exit ed;

2. During the receiving process, single pressing the "

" butt on w ill exit the RCC receiving

st at e, except t hat single pressing t he " SNOOZE/ LIGHT " but t on can light up t he backlight

funct ion, ot her but t ons have no funct ion;

3. Aut omat ic recept ion: every morning (current t ime zone)01:00, 02:00, 03:00 t o force

recept ion t o 04:00, 05:00 to choose t o receive 05:00, regardless of w hether the reception is

successful or not , it w ill no longer be received on t hat day, and t he RCC recept ion t ime is 7

minut es;

4. If t he receiving signal fails on t he same day, t he next receiving t ime w ill be 01:00 t he next

day;

5. In t he process of receiving RCC, w hen encount ering t he ALARM alarm, it will exit t he RCC

reception and sw it ch to t he alarm