Casio 2696 Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Siehe Casio 2696 herunter. Casio 2696 9 Seiten.

Stopwatch Mode

The stopwatch measures elapsed time in units of 1/100 second up to 59 minutes, 59.99 seconds (60 minutes). When the maximum limit is

reached, the elapsed time automatically returns to zero and timing continues from there.

Performing Stopwatch Operations

Timekeeping Mode

Mode Indicator

(Three times)

About two

seconds

A Button

Seconds

• Split/Reset

• Press during elapsed time

measurement to display the

split time.

• Press when elapsed time

measurement is stopped to

reset the stopwatch to all

zeros.

1/100 second

Minutes

D Button

Current Time (24-hour format)

• Start/Stop

• Each press starts and stops

elapsed time measurement.

❚ To configure time and date settings

manually

Timekeeping Mode

In the Timekeeping Mode,

hold down the A

A button

for about two seconds.

• This will cause the watch to

beep and display the

transmitter selection mode

setting screen.

A Button

• Displays the setting screen.

• Changes from the first

setting group to the next.

• Exits the setting screen.

B Button

• Scrolls back through the

options at the flashing

FREQUENCY (Frequency)

(selected) setting.

C Button

• Moves the flashing

between settings.

D Button

• Scrolls forward through the

options at the flashing

(selected) setting.

Operation Guide 2696/2832 ( B )

❚ Elapsed Time Measurement

Start

Stop

Reset

Pressing the A button while timing is stopped resets the

stopwatch to all zeros.

Cumulative Time Measurement

Pressing the D button to restart the stopwatch without resetting it

to all zeros causes the elapsed time measurement to resume from

where it was last stopped.

❚ Split Time Measurement

Start

Record split Release split

Stop

Reset

Pressing the A button while timing is being performed freezes the

current elapsed time on the display, but timing of the next split

continues internally.

• Changing to another mode while a split time is displayed cancels

the split time operation.

❚ 1st and 2nd Place Finishers

Start

1st finish

2nd finish

Displays time

Reset

(Displays time

of 2nd finish.

of 1st finish.)

Press the A

A button to

advance to the next group

of settings.

• This causes the 12/24-hour

timekeeping setting to flash.

Example: 12H (12-hour

timekeeping)

Use the C

C button so the

setting you want to change

is flashing on the display.

• Use the C button to cycle

through the time and date

settings shown below. Each

press of C causes the

applicable setting to flash.

12/24-hour

Seconds

Hour

Minute

timekeeping

Power Saving

Day

Month

Year

While the 12/24-hour

timekeeping setting is

flashing, press the D

button to select the

setting you want.

• Pressing the D button toggles

the timekeeping format between

12-hour ("12H" indicator) and

24-hour ("24H" indicator).

Configuring Time and Date Settings Manually

Normally, you should never need to configure time and date settings manually if you have auto receive turned on and you are within the

range of a time calibration signal. If the watch is unable to update its settings automatically for some reason, however, you can configure

them manually as described below.

Time and Date Settings

Timekeeping Mode

(Hold down about two seconds.)

Transmitter

Home City Code

Selection Mode

Auto Receive

Summer Time

12/24-hour

Seconds

Hour

Minute

timekeeping

Power Saving

Day

Month

Year

• While the setting screen (the one with a flashing setting) is on the

display, use the C and A buttons to move the flashing between

settings.

To restart the seconds

count to 00, press the D

button.

• Pressing the D button while

the seconds count is in the

range of 30 to 59 resets it to

Resets to 00.

00 and also adds 1 to the

minutes. Pressing the D

button in the range of 00 to 29

resets the seconds count

without changing the minutes.

While the hour, minutes,

year, month, or day setting

is flashing, use the D

D (+)

and B

B (–) buttons to

change the setting.

• Holding down either button changes the setting at high speed.

• When setting the hour, make sure you specify AM (A) or PM

(P) correctly, or that you specify the correct 24-hour time.

• You can set a date in the range of January 1, 2000 to

December 31, 2099.

• The day of the week is set automatically in accordance with

the date you set.

A Button

• Displays the setting screen.

• Changes from the first setting

group to the next.

• Exits the setting screen.

C Button

• Moves the flashing between

settings.

See "Signal Reception Settings" for information about

calibration signal, Home City, summer time, and auto receive

settings.

While the Power Saving

setting is flashing, press

the D

D button to toggle it

on (PS On) or off (PS OF).

Use the C button to select each of the settings and the D

and B buttons to change them.

When the settings are the

way you want, press the

(Back)

A button.

• This exits the setting screen.

(Forward)

• The display also will exit the setting screen automatically if

you do not perform any operation for about two or three

minutes.

• The watch automatically makes adjustments for leap years

and month lengths.