Danfoss FP975 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Thermostat Danfoss FP975 herunter. Danfoss FP975 16 Seiten. 7 day electronic programmer with separate outputs for heating & hot water, which can be set at independent times.
Auch für Danfoss FP975: Installationshandbuch (16 seiten), Gebrauchsanweisung (2 seiten)
Seite drucken
1.3 Before you start
Open the fl ap on the front of the
clock. Press the RESET (R/S) button
using a non-metallic object (e.g.
pencil/matchstick) until you hear a
click and the red light on the front of
the unit fl ashes once.
GB
This will cancel all manual overrides.
1.4 Choice of 24hr or AM/PM display
Press and hold DAY and NEXT
ON/OFF for 1.5 seconds to toggle
between 24hr clock and AM/PM
display, as required.
1.5 Setting the Date and Time
These settings are made during
manufacture and only need
to be changed in the unlikely
event that the unit has lost the
settings.
Setting the Date
Press and hold PROG for 5
seconds to display year.
Use the + or - buttons to set the
correct year.
Press DAY to display day and
month. Use the + or - buttons to
set the correct month (Jan = 1,
Feb = 2 etc.).
Press DAY to display day and
month. Use the + or - buttons to
set day of month.
Danfoss Heating
7