Danfoss FP975 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Терморегулятор Danfoss FP975. Danfoss FP975 16 сторінок. 7 day electronic programmer with separate outputs for heating & hot water, which can be set at independent times.
Також для Danfoss FP975: Посібник з монтажу (16 сторінок), Інструкція користувача (2 сторінок)

Друкувати сторінку

1.3 Before you start

Open the ﬂ ap on the front of the

clock. Press the RESET (R/S) button

using a non-metallic object (e.g.

pencil/matchstick) until you hear a

click and the red light on the front of

the unit ﬂ ashes once.

This will cancel all manual overrides.

1.4 Choice of 24hr or AM/PM display

Press and hold DAY and NEXT

ON/OFF for 1.5 seconds to toggle

between 24hr clock and AM/PM

display, as required.

1.5 Setting the Date and Time

These settings are made during

manufacture and only need

to be changed in the unlikely

event that the unit has lost the

settings.

Setting the Date

Press and hold PROG for 5

seconds to display year.

Use the + or - buttons to set the

correct year.

Press DAY to display day and

month. Use the + or - buttons to

set the correct month (Jan = 1,

Feb = 2 etc.).

Press DAY to display day and

month. Use the + or - buttons to

set day of month.

Danfoss Heating