Danfoss TP7000-RF Installation Instructions User Instructions - Seite 3

Blättern Sie online oder laden Sie pdf Installation Instructions User Instructions für Thermostat Danfoss TP7000-RF herunter. Danfoss TP7000-RF 14 Seiten. Electronic programmable room thermostat
Auch für Danfoss TP7000-RF: Installationsanleitung Handbuch (9 seiten)

Seite drucken

Installation

Instructions

Please Note:

This product should only be installed by a

qualiﬁ ed electrician or competent heating

installer and should be in accordance with the

current edition of the IEEE wiring regulations.

Speciﬁ cation

Thermostat Features

Power supply

Memory backup

Switching action of output relay

Switch rating of relay contact,

voltage and current

Transmitter frequency (RF only)

Transmitter range (RF only)

Rated Impulse Voltage

Dimensions (mm)

Ball Pressure Test

Temperature Range

Design Standard

Control Pollution Situation

Time accuracy

Temperature accuracy

*1: Unit must powered up for 6 days to charge cell before full back-up is available

Important note RF products: Ensure that there are no large metal objects, such

as boiler cases or other large appliances, in line of sight between the transmitter

and receiver as these will prevent communication between thermostat and receiver.

TP7000-RF

TP7000

2 x AA/MN1500/LR6 alkaline

batteries

Capacitor during battery change

for 1 minute

N/A

433.92 MHz

30 meters max.

N/A

138 wide x 88 high x 28 deep

75°C

5-30°C

EN 60730-2-7 (EN300220 for RF)

Degree 2

± 1 min.

±1°C

TP7000M

230v, 50 Hz

Rechargable

cell, 24 hrs (*1)

1 x SPDT, Type 1B

3(1) A, 230 volts

N/A

2.5Kv