Dungs MPA 4112 V2.0 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Brenner Dungs MPA 4112 V2.0 herunter. Dungs MPA 4112 V2.0 16 Seiten. Automatic burner control system
Auch für Dungs MPA 4112 V2.0: Benutzerhandbuch (16 seiten)
Seite drucken4.2 Intended use
The device is considered to be used as
intended if the following instructions are
followed:
• Use in heating systems and industrial
thermal process systems.
• Use only in accordance with the oper-
ating conditions specified on the rating
plate.
• Use only with the flame monitoring
equipment specified in the approval.
• Use only in good order and condition.
• Malfunctions must be rectified immedi-
ately by authorised specialist staff and
resolved prior to any further use.
• Use only when following the instruc-
tions in this user manual and the
national regulations.
4.3 Risks in case of misuse
• The equipment is reliable in operation
when used normally.
• Personal or consequential material
damage, financial damage or environ-
mental damage is possible in the event
of non-observance of the instructions.
• Misuse or misapplication pose a risk
to the life and limb of the operator, the
device and other material assets.
5. MPA 41xx
Microprocessor-controlled automatic burn-
er control system for continuous operation
of gas burners when using monitoring with
ionisation flame monitors or for intermittent
operation when using UV flame monitoring.
5.1 Approvals
EC type-examination certificate according to:
• EC Gas Appliances Regulation
• EC Pressure Equipment Directive
Suitable for applications up to SIL 3.
Meets the requirements of IEC 61508
5.2 Versions
The conformity / user manual relates to the following
MPA 41xx versions:
Version
Operating voltage
MPA 4112 V2.0
115 VAC
MPA 4112 V2.0
230 VAC
MPA 4114 V2.0
115 VAC
MPA 4114 V2.0
230 VAC
MPA 4122 V2.0
115 VAC
MPA 4122 V2.0
230 VAC
AM 41 V2.0 (Display)
internal
These MPA41xx versions are already parameterised
and can be used immediately.
Changes to program procedures and functions may be
made by qualified users.
A password is required to change the parameter set-
tings.
All settings can be found in the MPA 41xx product man-
ual:
www.dungs.com / .....
Material number
294815
294812
294822
294819
297009
297000
297004
6 ... 16