DUNLOP CRYBABY CRY BABY MINI 535Q Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Musik-Pedal DUNLOP CRYBABY CRY BABY MINI 535Q herunter. DUNLOP CRYBABY CRY BABY MINI 535Q 4 Seiten. Wah
Seite drucken
BASIC OPERATION
POWER
The Cry Baby
Mini 535Q Wah is powered by one 9-volt battery
®
(remove bottom plate to install), the Dunlop ECB003 9-volt
adapter, or the DC Brick
supplies.
OPERATION
1. Run an instrument cable from your guitar to the CBM535AR's
INSTRUMENT jack and another instrument cable from the
CBM535AR's AMPLIFIER jack into your amplifier's input.
2. This pedal is bypassed (off) while your foot is off the rocker.
To engage the wah effect, simply press the toe of the pedal
down with your foot.
3. Use the RANGE SELECTOR switch to select one of four
frequency ranges. See RANGE SELECTOR diagram.
4. Rotate the Q knob clockwise for a narrower bandpass to
emphasize higher end harmonics or counterclockwise for a
wider bandpass that emphasizes lower end harmonics.
5. To increase the CBM535AR's output, engage the BOOST
switch and rotate the VOLUME knob clockwise to increase the
amount of gain, up to 16dB, or counterclockwise to decrease it.
6. To increase effect ring-out time, remove bottom plate and
rotate AUTO-RETURN DELAY pot counterclockwise (set to 12
o'clock by default). To decrease effect ring out time, rotate the
control clockwise.
AUTO-RETURN DELAY POT (INTERNAL)
7. Rock your foot back and forth on the pedal to hear the vocal,
expressive tones that the Cry Baby Wah is famous for.
, Iso-Brick
, and Mini Iso-Brick
™
™
power
™
CBM535AR CRY BABY
MINI 535Q WAH
®
3