DUNLOP CRYBABY CRY BABY MINI 535Q Manuel - Sayfa 3

Müzik Pedalı DUNLOP CRYBABY CRY BABY MINI 535Q için çevrimiçi göz atın veya pdf Manuel indirin. DUNLOP CRYBABY CRY BABY MINI 535Q 4 sayfaları. Wah

BASIC OPERATION

POWER

The Cry Baby

Mini 535Q Wah is powered by one 9-volt battery

(remove bottom plate to install), the Dunlop ECB003 9-volt

adapter, or the DC Brick

supplies.

OPERATION

1. Run an instrument cable from your guitar to the CBM535AR's

INSTRUMENT jack and another instrument cable from the

CBM535AR's AMPLIFIER jack into your amplifier's input.

2. This pedal is bypassed (off) while your foot is off the rocker.

To engage the wah effect, simply press the toe of the pedal

down with your foot.

3. Use the RANGE SELECTOR switch to select one of four

frequency ranges. See RANGE SELECTOR diagram.

4. Rotate the Q knob clockwise for a narrower bandpass to

emphasize higher end harmonics or counterclockwise for a

wider bandpass that emphasizes lower end harmonics.

5. To increase the CBM535AR's output, engage the BOOST

switch and rotate the VOLUME knob clockwise to increase the

amount of gain, up to 16dB, or counterclockwise to decrease it.

6. To increase effect ring-out time, remove bottom plate and

rotate AUTO-RETURN DELAY pot counterclockwise (set to 12

o'clock by default). To decrease effect ring out time, rotate the

control clockwise.

AUTO-RETURN DELAY POT (INTERNAL)

7. Rock your foot back and forth on the pedal to hear the vocal,

expressive tones that the Cry Baby Wah is famous for.

, Iso-Brick

, and Mini Iso-Brick

™

power

™

CBM535AR CRY BABY

MINI 535Q WAH