Dunster House HANGOVER APEX G4-1824HAB Installationshandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Installationshandbuch für Gartenhäuser Dunster House HANGOVER APEX G4-1824HAB herunter. Dunster House HANGOVER APEX G4-1824HAB 18 Seiten. Bar 1.8m x 2.4m (6ft x 8ft)
Seite druckenG4 - 1824HAB HANGOVER APEX BAR 1.8m x 2.4m - Assembly Steps
STEP 4: SIDE
Items:
1x Floor - 1100x2300
1x Side Panel
1x Side Panel Without Door
1x Front Panel
1x Panel AH - 1150x1905
44x 60mm Screws
Back Panel:
Begin by fixing Panel AH - 2300x1905 to the floor assembly as
•
shown in the right hand picture.
Use 8x 60mm Screws to fasten panel to floor board.
•
Front Panels:
Finish off the side assembly by fixing the Front
•
Panel as illustrated.
Use 8x 60mm Screws to fasten to floor board.
•
Use an additional 10x 60mm Screws to fasten
•
Front Panel to Side Panels.
** Pre-drill parts before fixing screws **
NOTE:
The layout of your doors can be changed by installing the
relevant Panels on the opposite side of your Hangover Bar.
G3 - PANEL AH - 1150x1905
MFP - 2300x1100x10
Side Panels:
Fix both Side Panels & Side Panel With Door to the
•
assembled structure.
Use 4x 60mm Screws to fasten each Side panel to floor
•
board.
Use an additional 10x 60mm Screws to fasten Side
•
Panels to Panel AH - 2300x1905
Page 12