AudioCodes Mediant 1000B Hinweis zur Konfiguration - Seite 9
Blättern Sie online oder laden Sie pdf Hinweis zur Konfiguration für Netzwerk-Router AudioCodes Mediant 1000B herunter. AudioCodes Mediant 1000B 20 Seiten. Gateway & e-sbc
Auch für AudioCodes Mediant 1000B: Kurzanleitung (2 seiten), Handbuch zur Schnelleinrichtung (8 seiten)
Seite drucken
Configuration Note
2
Restoring Defaults using CLI
The device can be restored to factory defaults using the CLI, as described in the procedure
below.
2.1
Establishing CLI Communication
Before you can restore defaults, you need to establish CLI communication with the device.
To restore factory defaults using CLI:
1.
Cable the device's RS-232 serial port to the COM1 or COM2 communication port on
your PC. For a detailed description on serial cabling, refer to the device's Installation
Manual.
2.
Establish a serial communication with the device, using a serial communication
program such as HyperTerminal. The table below lists the COM port settings.
Parameter
Baud Rate
Data bits
Parity
Stop bits
Flow control
Version 6.4
Table 2-1: COM Port Settings
Devices
•
Mediant 600
•
Mediant 800 MSBG
•
Mediant 800 Gateway & E-SBC
•
Mediant 1000 MSBG
•
Mediant 1000
•
Mediant 1000B Gateway & E-SBC
•
Mediant 2000
•
Mediant 3000
•
Mediant 4000 E-SBC
MP-11x
MP-124
All
All
All
All
9
2. Restoring Defaults using CLI
Value
115,200 bps
9,600 bps
115,200 bps
8
None
1
None
May 2012