AudioControl LC6 Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medienkonverter AudioControl LC6 herunter. AudioControl LC6 16 Seiten. Six channel line output converter
Seite druckenDash Control Installation (available separately)
Placement And Mounting
The dash control may be mounted under the dash using its own bracket
or through a custom hole in the dash. It should be within reach of the
driver and in a spot where the LED is plainly visible.
Dash Bracket Installation
The dash control mounts with two screws which attach to the under-
side of the dashboard. Slide under the dash and place the dash control in
its mounting position, mark the two mounting holes, drill pilot holes, and
secure with two screws.
Custom Installation
For that custom, finished look, the dash control can be flush mounted
directly on the dash board (or anywhere else). We have provided
an extra label to help make this happen. Referencing
Figure 5, disassemble the dash control from the
mounting bracket. Start by pushing the
LED from its holder followed by removing
the circuit board and rotary control from
the bracket. Drill a 9/32" hole in
the dashboard for the control
along with a 1/8" hole for the
lock tab and a 13/64" hole for the
LED holder. Reassemble the
dash control components on the dashboard and apply the new label over
the openings.
Dual-Color Dash Control LED
The LED on your dash control is rainforest green and should brighten
or dim when you turn the knob. Should you wish to change the color to
amber, remove the plug connected to the LED and turn it 180 degrees
and plug it back in.
page 11