- ページ 11

メディア・コンバーター AudioControl LC6のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AudioControl LC6 16 ページ。 Six channel line output converter

Dash Control Installation (available separately)

Placement And Mounting

The dash control may be mounted under the dash using its own bracket

or through a custom hole in the dash. It should be within reach of the

driver and in a spot where the LED is plainly visible.

Dash Bracket Installation

The dash control mounts with two screws which attach to the under-

side of the dashboard. Slide under the dash and place the dash control in

its mounting position, mark the two mounting holes, drill pilot holes, and

secure with two screws.

Custom Installation

For that custom, finished look, the dash control can be flush mounted

directly on the dash board (or anywhere else). We have provided

an extra label to help make this happen. Referencing

Figure 5, disassemble the dash control from the

mounting bracket. Start by pushing the

LED from its holder followed by removing

the circuit board and rotary control from

the bracket. Drill a 9/32" hole in

the dashboard for the control

along with a 1/8" hole for the

lock tab and a 13/64" hole for the

LED holder. Reassemble the

dash control components on the dashboard and apply the new label over

the openings.

Dual-Color Dash Control LED

The LED on your dash control is rainforest green and should brighten

or dim when you turn the knob. Should you wish to change the color to

amber, remove the plug connected to the LED and turn it 180 degrees

and plug it back in.

page 11