AEV ACUO 908 Series Kurzanleitung - Seite 15

Blättern Sie online oder laden Sie pdf Kurzanleitung für Musik Mixer AEV ACUO 908 Series herunter. AEV ACUO 908 Series 17 Seiten. On air broadcast console

Seite drucken
AEV ACUO 908 Series Kurzanleitung

Logic GPI/O port

•
GPO 1 Out ( Start / Stop A) through the encoder master to the voice GPIO1 (Start
/ Stop A) select the channel assignment, so when the channel will in Start, the
contact between 1 and 9 will close, with the channel in Stop the contact is open .
•
GPO 2 Out ( Start / Stop B ) through the Master encoder select GPIO2 (Start /
Stop B) and select the channel assignment, so when the channel will put in Start,
the contact between 2 and 10 will close , with the channel put in Stop the contact is
open.
•
GPO Tally : Endcoder in each channel, through the Encoder, to the item TALLY set
ON , so closes the contact between pins 3 and 11 will close when the channel is put
in Start
•
GPO 3 : Endcoder by the Master, under GPO3 select the channel assignment , so,
the contact between pins 4 and 12 will close when the channel will put in Start in,
the contact will open when you put in Stop the channel.
•
GPI 1 ( In Start/Stop A) : through the Master encoder select GPIO1 (Start/Stop
A) and select the channel assignment, in which way , from the outside, through a
circuit to activate the photo - coupler placed between the pins 5 and 13, states Start
and Stop will alternate in the channel , the status of which will be remote using the
control Out Start/Stop A
•
GPI 2 ( In Start/Stop B ) through the Master encoder select GPIO2 (Start/Stop
B) and select the channel assignment, in which way , from the outside, through a
circuit to activate the photo - coupler place between pins 5:13 states will alternate
start and stop of the channel , the status of which will be using the remote control
Out Start/Stop A
AEV Broadcast Srl, via della Tecnica 33 – 40050 Argelato (BO) Italy
ACUO 908 Serie - AEV ON AIR CONSOLE
Web site www.aev.eu
15