AEV ACUO 908 Series Kurzanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Kurzanleitung für Musik Mixer AEV ACUO 908 Series herunter. AEV ACUO 908 Series 17 Seiten. On air broadcast console

Seite drucken
AEV ACUO 908 Series Kurzanleitung
USB - Line Module ( channels 7 – 8 )
All controls on the USB-Line input channel are described below.
1
2
3
4
5
6
7
8
9
AEV Broadcast Srl, via della Tecnica 33 – 40050 Argelato (BO) Italy
ACUO 908 Serie - AEV ON AIR CONSOLE
1 – START lamp, it
2 – knob jog ; directly it select the Gain input level the
in sequence, the following commands:
1th push-buttom Balance adjust (-12 ÷ +12 dB)
2th push-buttom Treble band adjust (-14 ÷ +14 dB)
3th push-buttom Middle band adjust (-14 ÷ +14 dB)
4th push-buttom Bass band adjust (-14 ÷ +14 dB)
5th push-buttom Private Tel active (OFF/ON)
6th push-buttom TB Studio to C.Room active (OFF/ON)
7th push-buttom PGM bus selection ( Speech/ Music)
8th push-buttom Control Room Mute active (OFF/ON)
9th push-buttom Mute C.Studio active (OFF/ON)
10th push-buttom Tally active (OFF/ON)
11th push-buttom TB Regia to C. Studio active
3 – USB to activate the digital usb source (only with the
channel in STOP)
4 – LINE to activate the line source (only with the
channel in STOP)
5 – PGM Button for routing the channel to the PGM bus.
6 – UTL Button for routing the channel to the UTL bus.
7 – AUX Button for routing the channel to the AUX bus.
8 - Button enabling the preview CUE.
9 - Fader.
Web site www.aev.eu
lights when the channel fader is
active
range is -12 ÷ +12 dB;
(OFF/ON)
9