AEV BISON WINCH KIT Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Winden AEV BISON WINCH KIT herunter. AEV BISON WINCH KIT 13 Seiten.
Auch für AEV BISON WINCH KIT: Installationshandbuch (12 seiten)

Seite drucken
12. Install winch body (fig. 17).
A.
Start two M10 x 30mm bolts in bottom locations.
B.
Start two M10 x 100mm bolts in top locations to help align the winch body.
C. Tighten bottom bolts.
D. Remove top winch bolts for now. These will be re-installed after Skid 1A and 1B have been installed.
13. Connect wiring to winch.
A.
Feed wire looms into winch cavity as shown (fig. 18). Leave service loop at pencil braces to allow for
body movement. Zip-tie wire harness at pencil braces.
B.
Attach main wires matching colors.
C. Attach ground wire.
D. Connect Plug.
B
A
Figure 17
Figure 18
B
A
7