AEV BISON WINCH KIT 설치 매뉴얼 - 페이지 9
{카테고리_이름} AEV BISON WINCH KIT에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEV BISON WINCH KIT 13 페이지.
AEV BISON WINCH KIT에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지)
페이지 인쇄12. Install winch body (fig. 17).
A.
Start two M10 x 30mm bolts in bottom locations.
B.
Start two M10 x 100mm bolts in top locations to help align the winch body.
C. Tighten bottom bolts.
D. Remove top winch bolts for now. These will be re-installed after Skid 1A and 1B have been installed.
13. Connect wiring to winch.
A.
Feed wire looms into winch cavity as shown (fig. 18). Leave service loop at pencil braces to allow for
body movement. Zip-tie wire harness at pencil braces.
B.
Attach main wires matching colors.
C. Attach ground wire.
D. Connect Plug.
B
A
Figure 17
Figure 18
B
A
7