Audioroot eSMART Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Batterieladegerät Audioroot eSMART herunter. Audioroot eSMART 4 Seiten. 4 bay desktop smart battery simultaneous charger with active thermal management
Seite druckenCHARGER OPERATION :
To operate the battery charger proceed as follows :
Place the charger on a flat level surface away from sources of heat and moisture.
–
Plug the supplied AC cord to the IEC C13 socket located on the charger's rear panel.
–
Plug the other end of the AC cord to a compatible wall socket.
–
Turn the charger ON with the main switch located on the unit's rear panel.
–
Insert one or multiple batteries in the charging bays, ensuring that the 5-way connector is fully
–
seated.
The status LEDs and OLED display will provide status information and the charger will
–
automatically begin charging.
Once the batteries are full, the charging will automatically stop and the OLED display and fan will
–
shut off.
CHARGING TIMES :
The following values are givent for a full charge from 0% to 100% state of charge.
eSMART Li-49Wh : 2.5 hours (@1500mA charging current)
–
eSMART Li-98Wh : 3.5 hours (@2000mA charging current)
–
SUPPORT :
Please contact us directly via email at
http://www.audioroot.fr [email protected]
Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation
for more support.