Audioroot eSMART Handbuch
Blättern Sie online oder laden Sie pdf Handbuch für Batterieladegerät Audioroot eSMART herunter. Audioroot eSMART 4 Seiten. 4 bay desktop smart battery simultaneous charger with active thermal management
Seite druckeneSMART QUAD CHARGER
4 bay desktop smart battery simultaneous charger
with Active Thermal Management
Version 1.0
Created : 27/10/2018
The eSMART QUAD CHARGER is a rugged and fully featured smart battery charger. The unit is
powered directly through mains AC and features a 160×128 pixels OLED screen and PWM controlled fan.
This charger is compatible with our eSMART Li-98Wh and Li-49Wh li-ion batteries. Similar batteries
from third party vendors are also compatible with this unit.
Thermal behavior of the charger is automatically monitored and controlled through an Active
Thermal Management system. This system uses fan speed or charging current to ensure the quietest and
coolest operation possible. When users choose fan based cooling its speed is automatically slaved to the
charger's internal temperature. Users can disable the fan with a switch located on the charger's front
panel. Once the fan is disabled, the integrated micro-controller will adapt the charger's maximum charging
current to reduce heat generation inside the unit.
Maximum charging current per bay : 2.0A
•
160×128 pixels full color OLED screen
•
Ultra quiet (10dBA min / 28dBA max) ON/OFF switchable and PWM controlled fan
•
All anodized aluminum CNC machined and extruded enclosure with laser engraving
•
90-240V AC input / 150W
•
IEC C14 power input connector
•
Weight : 1.6Kg
•
Dimensions : 270 x 176 x 53mm
•
Do not try to repair this product or replace any of its elements if this user manual does
not give specific instructions on how to do so. This equipement was built with surface
mount components and needs special tooling for repair. The removal of the electronic
The eSMART QUAD CHARGERS are carefully checked for good condition before being
shipped from the factory. Despite the protective carton and rugged design, shipping
may damage the unit. Check for possible carton damage when unpacking the unit.
Please save the carton for return shipment if necessary. AUDIOROOT does not
warrant against damage caused by returning products in other cartons than the
original ones or improperly packing the products. If shipping damage is evident,
notify the transportation company immediately. Only the consignee can file a claim
with the carrier for shipping damage. AUDIOROOT will fully co-operate in such an
event. Be sure to save the carton for the shipper to inspect.
http://www.audioroot.fr [email protected]
PCB needs special technical skills.
UNPACKING AND INSPECTION
Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation
Warning