Audioroot eSMART 매뉴얼

{카테고리_이름} Audioroot eSMART에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audioroot eSMART 4 페이지. 4 bay desktop smart battery simultaneous charger with active thermal management

페이지 인쇄

eSMART QUAD CHARGER

4 bay desktop smart battery simultaneous charger

with Active Thermal Management

Version 1.0

Created : 27/10/2018

The eSMART QUAD CHARGER is a rugged and fully featured smart battery charger. The unit is

powered directly through mains AC and features a 160×128 pixels OLED screen and PWM controlled fan.

This charger is compatible with our eSMART Li-98Wh and Li-49Wh li-ion batteries. Similar batteries

from third party vendors are also compatible with this unit.

Thermal behavior of the charger is automatically monitored and controlled through an Active

Thermal Management system. This system uses fan speed or charging current to ensure the quietest and

coolest operation possible. When users choose fan based cooling its speed is automatically slaved to the

charger's internal temperature. Users can disable the fan with a switch located on the charger's front

panel. Once the fan is disabled, the integrated micro-controller will adapt the charger's maximum charging

current to reduce heat generation inside the unit.

Maximum charging current per bay : 2.0A

•

160×128 pixels full color OLED screen

•

Ultra quiet (10dBA min / 28dBA max) ON/OFF switchable and PWM controlled fan

•

All anodized aluminum CNC machined and extruded enclosure with laser engraving

•

90-240V AC input / 150W

•

IEC C14 power input connector

•

Weight : 1.6Kg

•

Dimensions : 270 x 176 x 53mm

•

Do not try to repair this product or replace any of its elements if this user manual does

not give specific instructions on how to do so. This equipement was built with surface

mount components and needs special tooling for repair. The removal of the electronic

The eSMART QUAD CHARGERS are carefully checked for good condition before being

shipped from the factory. Despite the protective carton and rugged design, shipping

may damage the unit. Check for possible carton damage when unpacking the unit.

Please save the carton for return shipment if necessary. AUDIOROOT does not

warrant against damage caused by returning products in other cartons than the

original ones or improperly packing the products. If shipping damage is evident,

notify the transportation company immediately. Only the consignee can file a claim

with the carrier for shipping damage. AUDIOROOT will fully co-operate in such an

event. Be sure to save the carton for the shipper to inspect.

http://www.audioroot.fr [email protected]

PCB needs special technical skills.

UNPACKING AND INSPECTION

Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation

Warning