Audioroot eSMART 매뉴얼 - 페이지 2

{카테고리_이름} Audioroot eSMART에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audioroot eSMART 4 페이지. 4 bay desktop smart battery simultaneous charger with active thermal management

페이지 인쇄

UNIT CONNECTIONS AND CONTROLS:

1. Battery charging bay #1

2. Battery charging bay #2

3. Battery charging bay #3

4. Battery charging bay #4

5. Fan ON/OFF switch. This switch enables or disables the integrated fan.

When set to ON the fan will spin if at least one battery is charging. The fan will stop if no battery is

present or if all batteries are fully charged. The fan is PWM regulated and slaved to the charger's

internal temperature.

When set to OFF the fan is fully disabled. The charger's micro controler will adapt the maximum

charging current to avoid over-heating of the unit.

We recommend to set the switch to the ON position whenever possible (i.e when the fan

noise is not an issue).

6. OLED display

This display shows all the needed information regarding the SoC (state of charge) of each of

◦

the 4 batteries. See the "OLED DISPLAY" section of this manual for more information.

7. Top panel status LEDs. Each battery bay has a LED which shows the charging status :

- green flashing : the battery is charging

green solid

: no battery present in the charging bay

led off

http://www.audioroot.fr [email protected]

: the battery is fully charged

Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation