Audioroot eSMART Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Pengisi Daya Baterai Audioroot eSMART. Audioroot eSMART 4 halaman. 4 bay desktop smart battery simultaneous charger with active thermal management

Halaman Cetak

UNIT CONNECTIONS AND CONTROLS:

1. Battery charging bay #1

2. Battery charging bay #2

3. Battery charging bay #3

4. Battery charging bay #4

5. Fan ON/OFF switch. This switch enables or disables the integrated fan.

When set to ON the fan will spin if at least one battery is charging. The fan will stop if no battery is

present or if all batteries are fully charged. The fan is PWM regulated and slaved to the charger's

internal temperature.

When set to OFF the fan is fully disabled. The charger's micro controler will adapt the maximum

charging current to avoid over-heating of the unit.

We recommend to set the switch to the ON position whenever possible (i.e when the fan

noise is not an issue).

6. OLED display

This display shows all the needed information regarding the SoC (state of charge) of each of

◦

the 4 batteries. See the "OLED DISPLAY" section of this manual for more information.

7. Top panel status LEDs. Each battery bay has a LED which shows the charging status :

- green flashing : the battery is charging

green solid

: no battery present in the charging bay

led off

http://www.audioroot.fr [email protected]

: the battery is fully charged

Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation