Cassida C 200 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Geldzähler & Münzsortierer Cassida C 200 herunter. Cassida C 200 11 Seiten. Coin counter/sorter/wrapper
Auch für Cassida C 200: Benutzerhandbuch (20 seiten)
Seite drucken
2.
GETTING STARTED
2.1 Powering up
IMPORTANT:
Before turning on the Cassida C200, make certain no
coins are present in the coin hopper. This will cause an
"
" error when the C200 self-test is performed. To clear
the "
" error, press the "START/STOP" button, then empty
any coins present in the coin trays.
Turn on the power switch located on the rear of the unit. The machine will conduct a self-
check. The main display will show " " when the test has successfully completed.
2.2 Counting
The C200 always operates in a batching mode. To enable simple counting, all batch
quantities need to be set to zero. To set batch quantities to zero, press and hold the "-"
button for approximately three seconds until "
display.
Before loading the hopper, make sure there are no uncounted coins remaining in it from
the previous count.
To count coins, place them into the hopper and press the "START/STOP" button.
The C200 will start counting and will automatically sort all coins into the appropriate coin
trays.
The machine will automatically stop when all coins in the hopper are counted, or if the
batch quantity for any coin denomination is reached.
To stop the machine, press the "START/STOP" button.
10
" is displayed on the left side of the LED
To resume counting, press the "START/STOP" button.
When a coin tray becomes full, please stop the machine and empty the tray to ensure
correct machine operation. Stopping the machine will not alter or reset the count. You can
continue counting by pressing the "START/STOP" button.
As it counts, the Cassida C200 will automatically display the total value of counted coins
on the screen.
To view the number of coins counted for each denomination press the "REPORT" button.
The denomination will appear on the left and number of coins counted on the right part of
the screen.
To reset the coin count before starting a new batch, press the "C" button.
2.3 Adding
The C200 operates in ADD mode by default. In ADD mode, the coin count is added to the
count from previous batches. To start a new count, press the "C" button. This will reset the
coin count to zero.
2.4 Setting Batch Quantities
You may batch the desired quantity of each coin denomination. Each denomination can be
assigned a batch quantity.
Press "Set" until the desired denomination appears on the left part of the screen.
To assign a batch quantity for this denomination press the "BATCH" button until a desired
batch quantity appears on the display (20, 40, 60, 80, 100, 120, 140, 160, 180, 200,
250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 999).
Fine adjustments to batch quantity can by made by pressing "-" or "+" button.
Cassida C200 coin counter/sorter/wrapper
11