Contacta STS-K001L Installations- und Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Intercom System Contacta STS-K001L herunter. Contacta STS-K001L 16 Seiten. Window intercom system bridge bar kit

Seite drucken

Installation Instructions

We recommend that installation is carried out by a qualified engineer,

adhering to relevant standards.

Check the contents of the box to familiarise yourself with the components.

Recommended Tools

A toolkit recommended to install the system will include:

•

Screwdrivers (Flat or Blade 2.5mm

and Phillips Head PH2)

•

Battery or Mains Drill

•

Drillbits: 2mm, 3mm, 5mm and 7mm

•

Allen Key Set

•

Cable Tacking Gun (10mm)

•

Wire Cutters/Strippers

A hacksaw may be required for adjustments to the Bridge Bar unit.

Trim cables if necessary (excluding the power supply)

to the required length to connect to the back of the

amplifier. Bare approximately 6mm of the cable ends to

connect to the 2 pin plugs.

•

Pliers

•

Tape Measure

•

Pencil or Marker Pen

•

Torch

•

Cable Ties

•

Electrical Insulation Tape

•

Trunking

Negative -

or screened cable

Positive +