- ページ 5

インターホン・システム Contacta STS-K001LのPDF インストレーション&ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Contacta STS-K001L 16 ページ。 Window intercom system bridge bar kit

Installation Instructions

We recommend that installation is carried out by a qualified engineer,
adhering to relevant standards.
Check the contents of the box to familiarise yourself with the components.
Recommended Tools
A toolkit recommended to install the system will include:
Screwdrivers (Flat or Blade 2.5mm
and Phillips Head PH2)
Battery or Mains Drill
Drillbits: 2mm, 3mm, 5mm and 7mm
Allen Key Set
Cable Tacking Gun (10mm)
Wire Cutters/Strippers
A hacksaw may be required for adjustments to the Bridge Bar unit.
Trim cables if necessary (excluding the power supply)
to the required length to connect to the back of the
amplifier. Bare approximately 6mm of the cable ends to
connect to the 2 pin plugs.
Pliers
Tape Measure
Pencil or Marker Pen
Torch
Cable Ties
Electrical Insulation Tape
Trunking
Negative -
or screened cable
Positive +
5