2E GAMING AIR COOL ACM90D4 Betriebshandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Computer Hardware 2E GAMING AIR COOL ACM90D4 herunter. 2E GAMING AIR COOL ACM90D4 16 Seiten. Cpu cooling system
Seite drucken
- подсветка будет работать в демонстрационном режиме ARGB,
3 pin ARGB LED - подключение на материнскую плату +5V RGB
с возможностью изменять или синхронизировать изменение
цвета.
Installation of CPU cooling system:
Socket INTEL: LGA 1156 /1155 /1151 /1150/ 1200/ 1366/ 1700 Schema (А)
1. Preparing the universal plate (C): identify the Socket and place
the plastic retainers at each end of the plate in the position that
matches it.
2. Remove the protective film from the surface of the processor
cooling system that is in direct contact with the processor. Place
the mount with screws (A) in the position indicated in the schema
and fix with screws (D).
3. Open the package of thermal paste carefully. Apply thermal grease
to the processor, squeeze a small drop (4-5 mm diameter) onto
the center of the processor. Place the universal plate (C) on the
motherboard and the mount with screws (A) directly into the holes
that are in the plastic retainers. It is necessary to tighten the screws
with a wrench (E) securely, but not with excessive force, so as not
to damage the fasteners.
4. Connect the fan power to the corresponding connector on the
motherboard (CPU Fan).
5. Connecting the illumination of the upper decorative segment
(MOLEX and 3 pin ARGB LED). MOLEX connection to the power
supply - the backlight will work in ARGB demo mode, 3 pin ARGB
LED - connection to the motherboard + 5V RGB with the ability to
change or synchronize the color change.
Схема (А) / Schema (A)
6