2E GAMING AIR COOL ACM90D4 운영 매뉴얼 - 페이지 6

{카테고리_이름} 2E GAMING AIR COOL ACM90D4에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2E GAMING AIR COOL ACM90D4 16 페이지. Cpu cooling system

- подсветка будет работать в демонстрационном режиме ARGB,

3 pin ARGB LED - подключение на материнскую плату +5V RGB

с возможностью изменять или синхронизировать изменение

цвета.

Installation of CPU cooling system:

Socket INTEL: LGA 1156 /1155 /1151 /1150/ 1200/ 1366/ 1700 Schema (А)

1. Preparing the universal plate (C): identify the Socket and place

the plastic retainers at each end of the plate in the position that

matches it.

2. Remove the protective film from the surface of the processor

cooling system that is in direct contact with the processor. Place

the mount with screws (A) in the position indicated in the schema

and fix with screws (D).

3. Open the package of thermal paste carefully. Apply thermal grease

to the processor, squeeze a small drop (4-5 mm diameter) onto

the center of the processor. Place the universal plate (C) on the

motherboard and the mount with screws (A) directly into the holes

that are in the plastic retainers. It is necessary to tighten the screws

with a wrench (E) securely, but not with excessive force, so as not

to damage the fasteners.

4. Connect the fan power to the corresponding connector on the

motherboard (CPU Fan).

5. Connecting the illumination of the upper decorative segment

(MOLEX and 3 pin ARGB LED). MOLEX connection to the power

supply - the backlight will work in ARGB demo mode, 3 pin ARGB

LED - connection to the motherboard + 5V RGB with the ability to

change or synchronize the color change.

Схема (А) / Schema (A)