Audiovalve CORDA EARTUBE-1 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Audiovalve CORDA EARTUBE-1 herunter. Audiovalve CORDA EARTUBE-1 11 Seiten. Small-power amplifier specially designed to drive headphones

Seite drucken

Connections

At the rear side of the CORDA EARTUBE-1 two pairs of inputs allow you to connect two different

audio sources that have typical output voltages above 0.1 Volts (CD-player, cassette-player, tuner,

minidisc-player, ...). The source you want to listen to can be selected by the switch at the left front side

of the amp.

If your audio system already contains a central preamplifier or integrated amplifier you may prefer to

connect the EARTUBE-1 to the tape-out of your central amplifier. The source now can be selected by

the Rec-switch of this central amp.

Your headphone should be connected to one of the headphone-sockets on the front side of the

EARTUBE-1. You can also use the sockets to connect two headphones simultaneously.

The sockets are intended for 6.35 mm stereo jacks. If your headphone only has a 3.5 mm jack, then

use an adapter that can be obtained in most electronics or audio shops.