DAPAudio IEM-100 Beltpack Produkthandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Produkthandbuch für Mikrofonanlage DAPAudio IEM-100 Beltpack herunter. DAPAudio IEM-100 Beltpack 17 Seiten. Wireless in ear monitor set
Auch für DAPAudio IEM-100 Beltpack: Benutzerhandbuch (19 seiten)

Seite drucken

1. Receiver Control

 Equalizer Setting:

Press the SET button until EQ is flashing (Figure 12). Use the Up or Down button to adjust the Audio

Balance.

Note: If no button is pressed for 3 seconds, the system will automaticly exit the setting state and

save the current setting.

Receiver Functions

1. Limiter function;

If the limiter is switched on, the volume will corrected automatically if the value rises above the set

threshold. This in order to avoid distortion and protect your ears.

2. Equalizer setting:

3. Squelch setting:

If the RF signal is less then the squelch setting. The signal indicator will dim and the audio output

will be muted.

Mix Mode/ Stereo Control

The receiver receives two signals (1/L and 2/R) from the transmitter and then processes these signals in

either mix or stero mode.

Stereo Mode

In stereo mode the signals remain separate so that 1/L is heard through the left headphone and 2/R is

heard through the right headphone. The balance knob on the receiver can be used to adjust the

balance between the left and right headphones. See Figure 14.

Treble boost 6dB

Bass boost 6dB

Bass + treble boost 6dB

Flat

Fig. 8

Fig. 9

Fig. 10