Duratool D01965 Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bohrer Duratool D01965 herunter. Duratool D01965 12 Seiten. 18v li-ion cordless drill driver

Seite drucken

1. Charging the Battery

Make sure that the rotation direction switch (2) is in the middle position to

prevent the machine suddenly starting up.

Push the battery into the base of the machine until it clicks into place. See drawing.

Press the button (7) to remove the battery from the base of the machine.

Operation

Always follow the safety instructions and applicable rules.

Hold the machine ﬁrmly and press the drill against the item using even

pressure. Do not force the machine.

Only use drill bits not yet showing signs of wear. Worn drill bits can impair the

machine's e ciency.

Adjusting coupling

The machine has various coupling levels, which determine the force used to rotate

screws in and out.

Set the adjustment ring for the coupling (4) to the required coupling level.

Pre-select the lowest possible level for manoeuvring the screw. Select a higher

coupling level if the motor is struggling.

Fastening and undoing screws.

Set the rotation direction switch (2) to position‚R' to screw in screws.

Set the rotation direction switch (2) to position ‚L' to unscrew screws.

Turning on/o