Duratool D03405 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Messgeräte Duratool D03405 herunter. Duratool D03405 8 Seiten. Handheld anemometer

Press the + key to toggle between the three wind speed display modes.

Current wind speed

Current wind speed: device will measure the current speed and update every 1.5 seconds.

Maximum wind speed: During the measuring, the Maximum value of wind speed logged. It will be cleared

after a restart.

Average wind speed: The average value of recent 10 times measurements of wind speed..

Wind speed measuring range

The wind speed measuring range is 1mph(0.3m/s) ~ 67mph(30m/s), if the speed between 0.0m/s

and 0.3m/s,the wind speed will show 0m/s,and if the speed over 30m/s,the wind speed will show

"--.-".

Note:

1. It will stop measuring wind speed once exit wind speed mode.

2. If no wind speed or no button operation within 30 minutes under wind speed mode, it power off

automatically.

3. Current, maximum and average wind speed will be cleared after power off.

7.1.2 Temperature Display

There are two temperature display modes:



Temperature



Wind Chill

Press the Light key to toggle between the two temperature display modes.

Temperature

Current temperature:

The anemometer measures temperature in real time and updated every 1 minute. The Temperature

measuring(and wind chill) range is -30℃-60℃. If the temperature out of range, it display "- -.-". and

the wind chill also display "--.-".

maximum wind speed

average wind speed

Wind Chill