Addonics Technologies ADM218SA Handbuch

Blättern Sie online oder laden Sie pdf Handbuch für Adapter Addonics Technologies ADM218SA herunter. Addonics Technologies ADM218SA 2 Seiten. M2 - 1.8" micro sata adapter

Seite drucken

INTRODUCTION

This M2 - 1.8" Micro SATA adapter is designed to enable M2 SSD, with

length of 30, 42 or 60 mm, to be used as a direct replacement of the

1.8" micro SATA hard drive. As a result, any equipment, such as

Notebook computer, iPOD that uses a 1.8" SATA hard drive can be

easily converted to use the low power and shock resistant M2 SSD, just

like a SATA solid state drive (SSD). Once installed, the M2 appears as

an ordinary SATA hard drive to any OS and can be configured as a boot

device.

This M2 adapter, coupled with the micro SATA - 2.5" HDD adapter, can

also be used like a removable flash media in the Addonics Pocket

UDD25 or Internal UDD25

access to the M2 SSD via USB 3.0 / 2.0 or eSATA connection to any

computer.

M2 SSD installation and overview of the M2 - Micro SATA adapter assembly procedures

(Note that the M2 SSD shown in the diagram below is for illustration purpose and is not part of the product)



Insert the M2 SSD into the M2 socket at ~ 40° angle as shown in arrow 1.



Push down the M2 SSD as shown in arrow 2 and secure the media with the screw provided

M2 - 1.8" Micro SATA adapter

reader/writer, allowing easy read/write

The1.8" M2 adapter is designed with the same connector location and dimension as a 1.8" micro

SATA hard drive. It is a perfect solution for replacing the micro SATA hard drive with the low power

and shock resistant M2 media.

Model: ADM218SA