Duratuf MK4A Montageanleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Lagerung im Freien Duratuf MK4A herunter. Duratuf MK4A 16 Seiten. Kiwi series, base size 4.210mm x 2545mm

Seite drucken

MK4A FIXED WINDOW (Optional)

Step 1: Lay out the two window studs (883mm) and

Nog (590mm) on a flat surface. Position

Nog and nail in place using two 75mm nails

at each end.

Follow Steps 2 - 5 on page 8.

Step 6: From the outside of the shed, place glass

in Window Frame. Attach a Glazing Bead

(G100) with three rivets to each side of the

Window Frame to hold glass in place. Pre-

drilling Glazing Beads is recommended.

MK4A DOOR JAMB & CORNER FLASHINGS

Step1: Fit Door Jamb Flashing (A104) in be-

tween Top and Bottom Plates and hard

against Stud. Attach Door Jamb Flash-

ing with three 30mm clouts into studs on

the inside and three 50 mm nails on the

outside. Pre-drill holes on the outside to

protect flashing. Repeat with the other

Door Jamb.

Step2: Measure and cut Doorstep Flashing (A106)

to fit in between Door Jambs. Positioning

the Doorstep Flashing in between Door

Jambs at bottom of doorway, nail through

top of flashing using five 30mm Clouts. Re-

peat with the Overdoor Flashing (A105).

570mm