Contemporary Research ICC1 Produkthandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Produkthandbuch für Controller Contemporary Research ICC1 herunter. Contemporary Research ICC1 20 Seiten. Smart tv controller, rear mount

Seite drucken

RS-232 Commands

Command
Power Off
P0
Power On
P1
Power Toggle
PT
Operating
TM
Parameters
Volume
VL
Marquee Chan
T2
Ts & Qs
T Channel Up
TU
T Channel Dwn
TD
Force T Channel
TC
Select T Channel TT
Channel Query
T?
Q Channel Up
QU
Q Channel Dwn
QD
Force Q Channel
QC
Select Q Channel
QT
Contemporary Research Corporation
Description
"$A5,<dh>,<dl>,2,'P0' " (6 bytes) – checks TV data for true power control
"$A5,<dh>,<dl>,2,'P1' " (6 bytes) – checks TV data for true power control
"$A5,<dh>,<dl>,2,'PT' " (6 bytes) – checks TV data for true power control
"$A5,<dh>,<dl>,3,'TM',<setting>" (7 bytes)
Sets up key functions in the unit
bit 7
Selects TV frequency tuning mode, 0=CATV, 1=Broadcast/Antenna
bit 6 – 3 = 0
bit 2 – Channel up/down operation, 0=Tune Ring, 1=Send IR Keypad response
bit 1 – Numeric channel labels, 0=num labels off, 1=num labels on)
bit 0 – Alpha channel labels, 0=alpha labels off, 1=alpha labels on
"$A5,<dh>,<dl>,3,'VL',<vol level>" (7 bytes)
Sets TV volume level
0 = Mute
1 – 63 = Minimum level (1) to maximum volume (63)
"$A5,<dh>,<dl>,3,'T2'<channel> " (7 bytes) – Sets default power-up channel
Sets default channel selected when unit powers up (units with firmware older than
V5.5 used T1 to set Marquee Channel – update programming, if required, when
using V5.5 or newer firmware)
The following T-series channel commands select a channel and display the
channel label on the TV, while Q-series commands don't show the on-screen text.
"$A5,<dh>,<dl>,2,'TU' " (6 bytes) – Tunes to next channel up in Tune Ring
"$A5,<dh>,<dl>,2,'TD' " (6 bytes) – Tunes to next channel down in Tune Ring
"$A5,<dh>,<dl>,3,'TC', <channel>" (7 bytes) – Tunes to a specific channel
124 = RGB 2 input on TV
125 = RGB input on TV
126 = Select TV composite A/V input
127 = Select S-Video Input
0 = Blank video output to TV
255 = Unblank TV video (restore to previous channel)
Tip: Not all inputs are available on every TV make and model
"$A5,<dh>,<dl>,2,'TT' <channel>" (7 bytes) – Tunes channel if included in TR
"$A5,<dh>,<dl>,2,'T?' " (6 bytes) – Request response for current channel
"$A5,<dh>,<dl>,2,'QU' " (6 bytes) – Tunes to next channel up in Tune Ring
"$A5,<dh>,<dl>,2,'QD' " (6 bytes) – Tunes to next channel down in Tune Ring
"$A5,<dh>,<dl>,3,'QC', <channel>" (7 bytes) – Tunes to a specific channel
Same special-function channels as in the T Channel Select section above
"$A5,<dh>,<dl>,2,'QT',<channel>" (7 bytes) – Tunes channel if included in TR
9
ICC/ICW Smart TV Controller