4B TouchSwitch TS1V4HT Installation und Einrichtung - Seite 6
Blättern Sie online oder laden Sie pdf Installation und Einrichtung für Industrielle Ausrüstung 4B TouchSwitch TS1V4HT herunter. 4B TouchSwitch TS1V4HT 8 Seiten.
Seite druckenSet-up and Test:
Observe that the red LED on the sensor housing is on and the belt or pulley is not touching
the sensor. Slowly turn the test knob clockwise by hand, until the LED goes out. Check
that alarms and shutdowns work as expected. Turn the test knob back to its original
position. Observe that the LED is now on.
Periodically test the sensor and system, and visually inspect the contact surface of the
sensor.
Technology Innovation Quality Value
www.go4b.com
Rev2 June 2014