- ページ 6

産業機器 4B TouchSwitch TS1V4HTのPDF インストールとセットアップをオンラインで閲覧またはダウンロードできます。4B TouchSwitch TS1V4HT 8 ページ。

Set-up and Test:

Observe that the red LED on the sensor housing is on and the belt or pulley is not touching

the sensor. Slowly turn the test knob clockwise by hand, until the LED goes out. Check

that alarms and shutdowns work as expected. Turn the test knob back to its original

position. Observe that the LED is now on.

Periodically test the sensor and system, and visually inspect the contact surface of the

sensor.

Technology Innovation Quality Value

www.go4b.com

Rev2 June 2014