4B ETH-SWITCH1V4C-5P Betriebshandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Schalter 4B ETH-SWITCH1V4C-5P herunter. 4B ETH-SWITCH1V4C-5P 16 Seiten. Industrial ethernet switch

Seite drucken
4B ETH-SWITCH1V4C-5P Betriebshandbuch
Below is the procedure that the end user must adhere to in order to maintain the system in a safe state.
1. Inspect that all the cabling is in good state and that all the electrical connections, including the
terminal blocks in the junction boxes are secure and in good order.
2. Make sure there is no water damage to the inside of the enclosure or any junction boxes used.
3. Verify that the LED marked POWER is illuminated red.
If the system does not immediately shutdown as expected or alarm as required, then remove the
machine from service until the problem has been diagnosed and corrected.
WARNING – EXPLOSION HAZARD – Do not connect or disconnect while circuit is live unless area is
known to be non-hazardous
AVERTISSEMENT - RISQUE D'EXPLOSION – Ne pas debrancher tant que le circuit est sous tension,
a moins qu'il ne s'agisse d'un emplacement non dangereux
POTENTIAL ELECTROSTATIC CHARGING HAZARD –CLEAN ONLY WITH A DAMP CLOTH
RISQUE DE CHARGE ÉLECTROSTATIQUE POTENTIEL - NETTOYAGE AVEC UN CHIFFON
HUMIDE SEULEMENT
DO NOT OPEN WHEN ENERGIZED
NE PAS OUVRIR LORSQU'IL EST ÉNERGISÉ
Manufactured by Don Electronics Limited, Westfield Industrial Estate, Kirk Lane, Yeadon, Leeds, LS19 7LX, United Kingdom

10. TESTING AND MAINTENANCE

11. WARNINGS PRESENT ON PRODUCT

WARNING
PAGE 12