APLICOM A9 IPEX Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für GPS APLICOM A9 IPEX herunter. APLICOM A9 IPEX 12 Seiten.

INSTALLATION CHECKLIST

Action/Functionality

DEVICE

The place of installation is safe from accidental knocks.

INSTALLATION

Device is fastened tightly.

CABLES

Cables are led carefully along a well-protected route to the device and the peripherals.

All cables are correctly connected and secured with fuses.

Cables are fastened or supported in such a way that during use they exert no torsion on the

cable glands.

ANTENNAS

A9 IPEX unit is fitted in such a way that its visibility to base stations is as unobstructed as

possible (vehicle roof; as far as possible away from other antennas, flashing lights etc.). A9

IPEX unit is fitted in such a way that its satellite visibility is as unobstructed as possible

(vehicle roof; as far as possible away from other antennas, flashing lights etc.).

Check the A9 IPEX right orientation towards the GPS/GLONASS satellites and correct

fixing place and surface.

POWER ON

Connect PWR and if IGN is used, turn it on.

DEVICE

FINAL CHECK

Before completing the installation work, rigorous checking of any disturbances to vehicle or

machine, where the unit is installed, must be made. Special attention is needed to check

the vehicle safety systems and radio and multimedia equipment functions. This is to avoid

recalls to service because of un-noticed problems.

TROUBLE SHOOTING

Problem

No power

No GPRS connection

No GPS position

Solution

Check that all the cables and fuses are connected.

PWR is connected and IGN is on (if used).

Check that SIM card is inserted.

Check PIN CODE requirements.

Ensure that the top cover of the A9 IPEX has open sky view.

Check interferences from other structures to GPS antenna.

NOTE! Electronic heated or UV-protected windshield may disturb GPS antenna sky view.

If none of the above helps, please contact your equipment dealer for further

assistance.