Aplisens SGE-25.SMART Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör Aplisens SGE-25.SMART herunter. Aplisens SGE-25.SMART 20 Seiten. Smart level probes
Auch für Aplisens SGE-25.SMART: Benutzerhandbuch (20 seiten)

Seite drucken

SAFETY

−

The installation and start-up of the device and any activities related to operation

shall be carried out after thorough examination of the contents of user's manual

and the instructions related thereto;

−

installation and maintenance should be carried out by qualified staff having the

required authorizations to install electrical and measuring devices;

−

the device shall be used according to its intended purpose in line with the

permissible parameters specified on the nameplate

−

the protection elements used by the manufacturer to ensure probes safety may be

less effective if the device is operated in a manner not consistent with its intended

purpose;

−

before installing or disassembling the device, it is absolutely necessary to

disconnect it from the power source;

−

no repairs or alterations to the probes electronic system are permitted.

Assessment of damages and possible repair may only be performed by the

manufacturer or authorized representative;

−

do not use instruments if damaged. In case of malfunction, the device must be put

out of operation.

TRANSPORT AND STORAGE

3.1. Delivery check

After receiving the delivery, please refer to the general terms and conditions of contracts available

on the manufacturer website: https://aplisens.com/ogolne_warunki_umow.html.

3.2. Transport

Transport of probes shall be carried out with the use of covered means of transport, in original packages

with diaphragm provided with protection. The packaging shall be protected against movement and

direct impact of atmospheric factors.

3.3. Storage

Probes shall be stored in a factory packaging, in a room without vapours and aggressive substances,

protected

against

with a diameter of ≥ 30 cm, the coils of the coil should be fixed in relation to each other and the whole

should be fixed in the package. Avoid kinking the cable at the point where it exits the gland.

GUARANTEE

General terms and conditions of guarantee are available on the manufacturer's website:

www.aplisens.com/ogolne_warunki_gwarancji

The guarantee shall be repealed if the device is used against its intended use, failure

to comply with user's manual or interference with the structure of the device.

Revision 01.A.001/2021.09

mechanical

impact.

The

cable

should

EN.IO.SGE.25.SMART

Probe identification

(➔

coiled

into

);

circle