DURKOPP ADLER 550-867 Zusätzliche Anweisungen - Seite 14
Blättern Sie online oder laden Sie pdf Zusätzliche Anweisungen für Scanner DURKOPP ADLER 550-867 herunter. DURKOPP ADLER 550-867 20 Seiten. Btsr sensor
Seite drucken
5
5.1 Fitting the thread guide
Abb. 14: Installing the thread guide
1. Attach the thread guide (2).
2. Tighten the screws (1).
3. The thread guide (2) must lie flush against the machine - bend the
Bend if required
Abb. 15: Position of thread guide
1. Check the position of the thread guide on the sewing machine arm.
2. If the position is correct, continue fitting the BTSR sensor.
12
Fitting the new parts
①
②
(1) - Screws
thread guide (2) by hand if necessary.
Position correct, lying
fully flush against the
sewing machine arm
Fitting the new parts
(2) - Thread guide
Too far away from the
sewing machine arm
Additional Instructions 550-867 - 01.0 - 08/2017