DURKOPP ADLER 550-867 Extra instructies - Pagina 14

Blader online of download pdf Extra instructies voor {categorie_naam} DURKOPP ADLER 550-867. DURKOPP ADLER 550-867 20 pagina's. Btsr sensor

Abb. 14: Installing the thread guide

1. Attach the thread guide (2).

2. Tighten the screws (1).

3. The thread guide (2) must lie flush against the machine - bend the

Bend if required

Abb. 15: Position of thread guide

1. Check the position of the thread guide on the sewing machine arm.

2. If the position is correct, continue fitting the BTSR sensor.

Fitting the new parts

①

②

(1) - Screws

thread guide (2) by hand if necessary.

Position correct, lying

fully flush against the

sewing machine arm

Fitting the new parts

(2) - Thread guide

Too far away from the

sewing machine arm

Additional Instructions 550-867 - 01.0 - 08/2017